Preparation and characterization of sulfated zirconia (SO4/ZrO2)/Nafion composite membranes for PEMFC operation at high temperature/low humidity

Fine particle superacidic sulfated zirconia (SO₄²⁻/ZrO₂, S-ZrO₂) was synthesized by ameliorated method, and composite membranes with different S-ZrO₂ contents were prepared by a recasting procedure from a suspension of S-ZrO₂ powder and Nafion solution. The physico-chemical properties of the membranes were studied by ion exchange capacity (IEC) and liquid water uptake measurements, scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis, thermogravimetry–mass spectrometry (TG–MS) and Fourier transform infrared (FT-IR) spectroscopy. The results showed that the IEC of composite membrane increased with the content of S-ZrO₂, S-ZrO₂ was compatible with the Nafion matrix, the incorporation of the S-ZrO₂ could increase the crystallinity and also improve the initial degradation temperature of the composite membrane. The performance of single cell was the best when the S-ZrO₂ content was 15 wt.%, and achieved 1.35 W/cm² at 80 °C and 0.99 W/cm² at 120 °C based on H₂/O₂ and at a pressure of 2 atm, the performance of the single cell with optimized S-ZrO₂ was far more than that of the Nafion at the same condition (e.g. 1.28 W/cm² at 80 °C, 0.75 W/cm² at 120 °C). The 15 wt.% S-ZrO₂/Nafion composite membrane showed lower fuel cell internal resistance than Nafion membranes at high temperature and low relative humidity (RH).     

Development and validation of HPLC methods for enantioseparation of mirtazapine enantiomers at analytical and semipreparative scale using polysaccharide chiral stationary phases

Novel HPLC methods were developed for the analytical and semipreparative resolution of new antidepressant drug mirtazapine enantiomers. At analytical scale, the separation of the mirtazapine enantiomers was investigated using both cellulose and amylose tris(3,5-dimethylphenylcarbamate) (CDMPC and ADMPC) chiral stationary phases under normal-phases and polar organic modes. Good baseline enantioseparation was achieved using cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phases under both normal-phases and polar organic modes. Furthermore, the elution order of mirtazapine enantiomic pairs was found reversed by changing the stationary phase from the amylose-based ADMPC–CSPs to its cellulose-based counterpart, CDMPC–CSPs. The validation of the analytical methods including linearity, limit of detection (LOD), limit of quantification (LOQ), recovery and precision, together with the semipreparative resolution of mirtazapine racemate were carried out using cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phases and methanol as mobile phase without any basic additives under polar organic mode. At analytical scale, the elution times of both enantiomers were less than 6 min at normal temperature and 1.0 ml/min, with the separation factor () 1.99 and the resolution factor (Rs) 3.56. Then, the analytical methods were scaled up to semipreparative loading to obtain small quantities of both mirtazapine enantiomers. At semipreparative scale, about 16 mg/h enantiomers could be isolated and elution times of both enantiomers were less than 10 min at 2.0 ml/min. To increase the throughput, the technique of boxcar injections was used. One enantiomer ((−)-(R)-mirtazapine) was isolated with purity of >99.9% e.e. and >98.0% yield and another ((+)-(S)-mirtazapine) was isolated with purity of >97.0% e.e. and >99.0% yield. In addition, optical rotation and circular dichroism (CD) spectroscopy of both mirtazapine enantiomers isolated were also investigated.     

随机模糊集与随机集

本文研究了三个方面的工作：一是定义了一种模糊集上的可测结构，从而定义了随机模糊集，这些定义都与论域Ｘ上的拓扑结构无关。将通常意义下的集合看成特殊模糊集得到的通常集合上的超可测结构与文（３）中的定义一致；二是给出了随机模糊集、随机集的一些等价条件；三是研究了随机模糊集、随机集的分布与其有限维落影族的关系。     

Energy transfer channels at the diffraction-anomaly in transparent gratings and applications in sensors

Diffraction anomaly corresponds to an energy re-distribution in the reflected and transmitted light beams and in different diffraction orders of a grating, which leads to sharp modulations on the transmission and reflection spectra. In gratings sitting on a transparent substrate, this portion of the energy is actually transferred to channels separated from the reflected and transmitted beams. These channels are based on multiple degenerated diffraction processes at the same wavelength as the diffraction anomaly. The spectroscopic response of these channels is sensitive to the change in the environmental refractive index and can be utilized in sensor devices.     

Synthesis and Characterization of Hydrophilic Trityl Radical TFO for Biomedical and Biophysical Applications

Tetrathiatriarylmethyl (TAM, trityl) radicals have found wide applications as spin probes/labels for EPR spectroscopy and imaging, and as polarizing agents for dynamic nuclear polarization. The high hydrophilicity of TAM radicals is essential for their biomedical applications. However, the synthesis of hydrophilic TAM radicals (e.g., OX063) is extremely challenging and has only been reported in the patent literature, to date. Herein, an efficient synthesis of a highly water-soluble TAM radical bis(8-carboxyl-2,2,6,6-tetramethylbenzo[1,2-d:4,5-d′]bis([1,3]dithiol-4-yl)-mono-(8-carboxyl-2,2,6,6-tetrakis(2-hydroxyethyl)benzo[1,2-d:4,5-d′]bis([1,3]dithiol-4-yl)methyl (TFO), which contains four additional hydroxylethyl groups, relative to the Finland trityl radical CT-03, is reported. Similar to OX063, TFO exhibits excellent properties, including high water solubility in phosphate buffer, low log P, low pK_a, long relaxation times, and negligible binding with bovine serum albumin. On the other hand, TFO has a sharper EPR line and higher O₂ sensitivity than those of OX063. Therefore, in combination with its facile synthesis, TFO should find wide applications in magnetic resonance related fields and this synthetic approach would shed new light on the synthesis of other hydrophilic TAM radicals.     

Tailorable PC71BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High‐Performance Polymer Solar Cells

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC₇₁BM (phenyl‐C₇₁‐butyric acid methyl ester) usually has a “random” composition of mixed regioisomers or stereoisomers. Here PC₇₁BM has been isolated into three typical isomers, α‐, β₁‐ and β₂‐PC₇₁BM, to establish the isomer‐dependent photovoltaic performance on changing the ternary composition of α‐, β₁‐ and β₂‐PC₇₁BM. Mixing the isomers in a ratio of α/β₁/β₂=8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC₇₁BM as photoactive layer (PTB7=poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]]). The three typical PC₇₁BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average‐performing PCE of 1.28–7.44 % due to diverse self‐aggregation of individual or mixed PC₇₁BM isomers in the otherwise same polymer solar cells.     

A Porphyrin-Based Covalent Organic Framework for Metal-Free Photocatalytic Aerobic Oxidative Coupling of Amines

Imines are important intermediates in drug synthesis. Photocatalytic aerobic oxidative coupling of amines has been considered as a clean and promising way to produce imines and has attracted great attention. Herein, we designed and synthesized a novel two-dimensional porphyrin-based covalent organic framework (Por-BC-COF) which adopts an AA stacking mode with excellent crystallinity, high Brunauer–Emmett–Teller surface areas (1200 m² g⁻¹), wide light absorption range (200–1300 nm) and good stability in a variety of organic solvents. Por-BC-COF can be used as a metal-free heterogeneous photocatalyst for the photocatalytic oxidation of amines to imines under visible light and red light with a high yield (97 %). This work presents a novel and efficient COF photocatalyst in the application of light-driven organic synthesis.     

Physical,hydrochemical and isotopic characteristics of springs in Beijing,China, compared to historical properties

A physical, hydrochemical and isotopic evaluation of springs in Beijing was conducted in 2009 to reveal apparent changes in the properties of those springs. The results showed that most of the 2nd class springs and more than 50 % of the 1st class springs recorded in the early 1980s were depleted, while the discharges of existing springs have also decreased sharply. In addition, the majority of springs were of the HCO₃–Ca–Mg type and good water quality, with the quality indices changing slightly compared to those recorded 30 years ago. The abundances of ²H, ¹⁸O, and ³H in the springs indicated that most of the springs were of meteoric origin with a relatively close connection to modern atmospheric precipitation. As a result, the springs have a relatively strong renewability within a shallow circulation.     

CoNi-embedded nitrogen-enriched porous carbon framework for long-life lithium–sulfur batteries

Journal of Solid State Electrochemistry - Metal–organic framework (MOF) derivatives are excellent energy storage devices such as lithium–sulfur batteries. Here, a bimetallic...